VideoText.cat

00:00
00:00
00:00
and either writes data by changing the magnetization of specific sections

Diapositiva 4 / 10

← →

↑ Esborrar
00:00:04:00 Hard drive teardown
00:00:07:00 flying heads, voice coil motors, amazingly smooth surfaces & signal processing
00:00:10:00 series 3 engineerguy videos
00:00:17:00 A home computer is a powerful tool, but it must store data reliably to work well, otherwise it's kind of pointless, isn't it.
00:00:23:00 Let's look inside and see how it stores data.
00:00:30:00 Look at that: It's marvelous.
00:00:32:00 It's an ordinary hard drive, but its details, of course, are extraordinary.
00:00:35:00 Now, I'm sure you know the essence of a hard drive:
00:00:38:00 We store data on it in binary form - ones and zeros.
00:00:41:00 Now, this arm supports a "head"
00:00:43:00 which is an electro-magnet that scans over the disk
00:00:45:00 and either writes data by changing the magnetization of specific sections
00:00:48:00 on the platter or it just reads the data
00:00:50:00 by measuring the magnetic polarization.
00:00:53:00 Now, in principle, pretty simple,
00:00:54:00 but in practice a lot of hard core engineering.
00:00:58:00 The key focus lies in being sure that the head can precisely
00:01:02:00 error free
00:01:03:00 read and write to the disk.
00:01:05:00 The first order of business is to move it with great control.
00:01:08:00 To position the arm engineers use a "voice coil actuator".
00:01:11:00 The base of the arm sits between two powerful magnets.
00:01:14:00 They're so strong they're actually kind of hard to pull apart.
00:01:17:00 There.
00:01:18:00 The arm moves because of a Lorentz force.
00:01:20:00 Pass a current through a wire that's in a magnetic field
00:01:23:00 and the wire experiences a force;
00:01:25:00 reverse the current and the force also reverses.
00:01:28:00 As current flows in one direction in the coil the
00:01:30:00 force created by the permanent magnet makes the arm move this way,
00:01:34:00 reverse the current and it moves back.
00:01:36:00 The force on the arm is directly proportional to the current
00:01:39:00 through the coil which allows the
00:01:40:00 arm's position to be finely tuned.
00:01:43:00 Unlike a mechanical system of linkages there
00:01:45:00 is minimal wear and it isn't sensitive to temperature.
00:01:49:00 At the end of the arm lies the most critical component: The head.
00:01:53:00 At its simplest it's a piece of ferromagnetic material wrapped with wire.
00:01:57:00 As it passes over the magnetized sections of the platter
00:01:59:00 it measures changes in the direction of the magnetic poles.
00:02:02:00 Recall Faraday's Law: A change in magnetization
00:02:06:00 produces a voltage in a nearby coil.
00:02:08:00 So, as the head passes a section where the polarity
00:02:10:00 has changed it records a voltage spike.
00:02:14:00 The spikes - both negative and positive - represent a "one"
00:02:16:00 and where there is no voltage spike corresponds to a "zero.
00:02:19:00 The head gets astonshingly close to the disk surface
00:02:22:00 100 nanometers in older drives, but today under
00:02:25:00 ten nanometers in the newest ones.
00:02:27:00 As the head gets closer to the disk its magnetic field
00:02:30:00 covers less area allowing for more sectors
00:02:32:00 of information to be packed onto the disk's surface.
00:02:35:00 To keep that critical height engineers use an ingenious method:
00:02:38:00 They "float" the head over the disk.
00:02:41:00 You see, as the disk spins it forms a boundary layer of air that
00:02:44:00 gets dragged past the stationary head at 80 miles per hour at the outer edge.
00:02:48:00 The head rides on a "slider" aerodynamically designed to float above the platter.
00:02:52:00 The genius of this air-bearing technology is its self-induced adjustment:
00:02:56:00 If any disturbance causes the slider to rise too high it "floats" back to the where it should be.
00:03:01:00 Now, because the head is so close to the disk surface
00:03:04:00 any stray particles could damage the disk resulting in data loss.
00:03:07:00 So, engineers place this recirculating filter in the air flow;
00:03:11:00 it removes small particles scraped off the platter.
00:03:14:00 To keep the head flying at the right height the platter is made incredibly smooth:
00:03:18:00 Typically this platter is so smooth that it has a surface roughness of about one nanometer.
00:03:23:00 To give you an idea of how smooth that is: let's imagine that this section is enlarged
00:03:26:00 until it's as long as a football field - American or International -
00:03:31:00 the average "bump" on the surface would be about three hundredths of an inch.
00:03:35:00 The key element of the platter is the magnetic layer,
00:03:38:00 which is cobalt - with perhaps platinum and nickel mixed in.
00:03:41:00 Now this mixture of metals has high coercivity,
00:03:43:00 which means that it will maintain that magnetization - and thus data - until it is exposed to another powerful magnetic field.
00:03:50:00 One last thing that I find enormously clever:
00:03:52:00 Using a bit of math to squeeze up to forty percent more information on the disk.
00:03:57:00 Consider this sequence of magnetic poles on the disk's surface - 0-1-0-1-1-1.
00:04:04:00 A scan by the head would reveal these distinct voltage spikes -
00:04:06:00 both positive or negative for the "ones".
00:04:09:00 We would be easily able to distinguish it from, say, this similar sequence.
00:04:13:00 If we compare them they clearly differ.
00:04:16:00 Engineers, though, always work to get more and more data onto a hard drive.
00:04:20:00 One way to do this is to shrink the magnetic domains,
00:04:22:00 but look what happens to the voltage spikes when we do this.
00:04:25:00 For each sequence the spikes of the ones now overlap and
00:04:28:00 superimpose giving "fuzzy" signals.
00:04:30:00 In fact, the two sequences now look very similar.
00:04:33:00 Using a technique called Partial Response Maximum Likelihood engineers have developed
00:04:37:00 sophisticated codes that can take a murky signal like this,
00:04:40:00 generate the possible sequences that could make it up and then choose the most probable.
00:04:45:00 As with any successful technology, these hard drives remain unnoticed in our daily lives,
00:04:49:00 unless something goes wrong.
00:04:51:00 I'm Bill Hammack, the engineer guy.

1 00:00:05:00

-

2 00:00:11:00

-

3 00:00:18:00

-

4 00:00:43:00

-

5 00:01:53:00

-

6 00:02:03:00

-

7 00:02:24:00

-

8 00:02:42:00

-

9 00:03:44:00

-

10 00:04:34:00

-

Document PDF ZIP

Etiquetes: Computer Technology, Hard Drives, Hardware

Durada: 5m 4s

Si vols saber com funciona un disc dur, aquest vídeo ho explica en 5 minuts